KKE Plus Wash n Wax | Premium Car Wash Shampoo | Shampoo for Cars

KKE Plus Wash n Wax is a rich, highly concentrated car wash shampoo from KKE Autocare, fortified with gloss-enhancing polymers that lay down a thin wax-like protective layer with every single wash. Clean your car, and the paint comes out looking shinier than when you started — a small bonus on every wash that builds into meaningful protection over weeks.

A standard car shampoo cleans paint but strips a small amount of wax each time. Then you wax separately to restore the protective layer. Wash n Wax compresses both into one step — the polymer surfactants in the shampoo lay down a thin protective layer at the same time as the cleaning chemistry lifts dirt. You won't get the full depth of a dedicated wax, but every wash adds a little to your protection rather than taking from it.

Most car shampoos are slightly acidic or alkaline — they clean effectively but slowly degrade the wax, sealant, or ceramic coating already on the paint. KKE Plus Wash n Wax is pH-neutral, so the chemistry doesn't attack your existing protection. The wax you applied last month stays intact, and the polymers in the shampoo add a little more on top with every wash.

The special polymer surfactants in Wash n Wax reduce surface tension on the paint as you wash. This hydrophilic effect makes wash water flow off the paint cleanly, encapsulating and flushing dirt away rather than dragging it across the clear coat. As the water sheets off, the polymers themselves are deposited as a thin protective film — leaving paint looking noticeably shinier than a standard shampoo would.

1. Add 30–50 ml of KKE Plus Wash n Wax to a clean bucket.
2. Fill with water at moderate pressure to build rich foam.
3. Wash the car from top to bottom using a clean wash mitt.
4. Rinse thoroughly with clean water.
5. Dry with a microfibre drying towel — the polymers leave paint looking shinier than a standard shampoo finish.

Wash n Wax is a maintenance-tier product — it's designed to work alongside a dedicated wax or sealant, not replace it on bare paint. For best results, apply a dedicated wax (such as KKE Thick Wax or CernaGlow) every 2–3 months as your base protective layer, and use Wash n Wax in between to maintain and build on that protection.

• Clear coat paint
• Single-stage paint
• Glossy finishes
• Existing wax, sealant, or ceramic coating
• Matte finishes (test on a small inconspicuous area first)