Protection you can see. The KKE Pro Seal creates a hydrophobic barrier on your paint that makes water bead on flat surfaces and sheet off on angles. Pour water on a treated panel and watch it slide right off — that's the Pro Seal difference. No abrasives, no correction. Pure protection.

Pro Seal combines three protection technologies in one product. Bonding silicone locks to the clear coat at a molecular level — unlike ordinary silicones that sit on top and wash off after one or two washes. PTFE (the same fluoropolymer used in non-stick coatings) creates an ultra-low surface energy that water cannot grip. Carnauba wax adds deep, warm gloss and natural water resistance. Together, they create a protective barrier that lasts 8–12 weeks through regular washing.

• Hydrophobic Barrier — Water beads on flat surfaces and sheets off in flat sheets on angles
• Bonds to Clear Coat — Molecular bonding means protection survives multiple washes
• Triple Protection — Bonding silicone + PTFE + carnauba wax working together
• Zero Abrasives — No risk of over-correction. Safe on any painted surface
• 8–12 Week Protection — Reapply every 2–3 months for continuous coverage
• Versatile Application — Use with a DA polisher or apply by hand with a foam applicator

Apply a thin, even coat using a finishing pad on a DA polisher, or by hand with a foam applicator. Work one panel at a time. Allow to haze for 1–2 minutes, then buff gently with an ultra-soft microfibre cloth. For best results, apply after polishing with KKE Pro 9500 or KKE Pro 8000. Reapply every 2–3 months for continuous hydrophobic protection.